March 15, 2021 / By paicristal.shop
IPER-CUT is the car polishing compound that removes scratches from the car body and gives shine in one step, safe and easy to use.
IPER-CUT is the 2 in 1 polishing paste that removes scratches and marks from the car body, and at the same gives an exceptional shine.
The car polishing compound IPER CUT is the product for you if you need to quickly and safely remove scratches from car door handles, if you need to remove even deeper scratches from the hood and car body in general. IPER-CUT polishing paste is also ideal when you want to restore the shine of the car piant and bring it back to a “like new” condition. In fact, it is natural that over the years, washing after washing and due to the action of the sunlight, the color of the car fades, losing its initial brightness. IPER-CUT polishing paste allows you to get back that shiny, full and deep original color, in a few simple steps.
This is possible thanks to the special formulation of IPER-CUT polishing paste and through its particular technology that we call O.S.P., “One Step Process”. In fact, IPER-CUT contains a mix of abrasive agents and micro-polishing agents. This specific blend makes possible a one-step process, assuring that IPER-CUT polishing paste removes scratches, defects, marks and dullness, guaranteeing at the same time an unbeatable high gloss finish.
The car polishing compound IPER-CUT polishing paste is very easy to use. You can decide to apply it manually or, if you are equipped, you can polish using a polisher or a drill.
How to use IPER-CUT?
In case of hand use, just pour 2-3 drops of IPER-CUT on a microfiber cloth, then spread the paste on the surface to be treated with circular movements, until the scratch to be removed disappears. In the case of larger surfaces (for example the hood), pour 4-5 drops of IPER-CUT on the cloth and then spread with circular movements. Repeat the procedure, adding more product, until you apply IPER-CUT all over the area to be treated at least once. IPER-CUT polishing paste can also be applied by hand using a foam pad instead of the microfiber cloth. The procedure to follow is very similar. The use of the pad is recommended on larger areas especially, because it speeds up the process and allows you to be more homogeneous. So, a microfiber cloth is fine to remove scratches from the car door handle; while for the hood you are faster and more effective using the foam pad.
In case of machine use, it is best to use a polisher (rotary or random orbital, it is up to you, they are both fine); set a speed between 800-1500 RPM. Apply the foam pad to the back plate and pour 4-5 drops of IPER-CUT onto the pad. Use the foam pad to spread the paste on the area, and then start the polisher: in this way, you will limit the splashes of product. Do not focus too much on the same area in order not to overheat the paint, but move up and down in an area 50×50 cm. Keep polishing until the white paste begins to become transparent. At this point, clean up IPER.CUT residues using a clean microfiber cloth. You will immediately notice the difference between the polished part and the one still to be polished.
If you don’t have a polishing machine, you can also use a normal drill, equipped with the special back plate and a small foam pad. Keep a medium speed and spread the product evenly on the surface. The use of the drill is very convenient when it comes to polish the headlights. IPER-CUT polishing compound also gives excellent results for restoring the brightness of medium-oxidized headlights.
The formulation of IPER-CUT polishing compound
IPER-CUT polishing compound has been formulated with all the necessary precautions to be used also in professional work environments. It does not contain volatile silicones and is safe for the operator. In fact, it does not contain all those “heavy chemicals” present in major part of generic pastes you can find in the market place, which have in little account the user’s health and the environment.